Rear Suspension Installed

June 6, 2010 - Didn't get a enough accomplished over Memorial Day weekend that warranted a new post but this past weekend, I definitely did. After pouring over numerous threads on 914world.com about working with the polygraphite bushings that go into the trailing arms, I finally decided to operate on mine. I had previously ordered the bushings from PelicanParts.com for $70; a set of 4, 2 on each trailing arm. One positive thing I can say about Pelican Parts, is that they ship really fast.



The polygraphite bushings are notorious for squeeking so I made sure that I did what most of the threads advised. I took a wrasp and filed off enough inside of each bushing so that the large pin that fits in them does not bind very much. I initially had to press one in and then read that this was way too tight. Once I was able to push the pin into place, I was able to determine that I needed to file off about 1/8" off each bushing end so that the pin protrudes enough to make contact with the susepnsion ear and the control arm bearing; metal on metal, not bushing on metal. I then cut 4 small grease channels into each bushing with a hack saw blade and painted the inside and channels with Permatex anit-seize lubricant.

Here's how the bushings fit into the traing arm and the pin fits into the bushings:



Oh yeah, I forgot to mention that earlier in the week I had new $50 bearings per trailing arm pressed in at my favorite Tire Kingdom store. I also had the guy take out and press in new races into the front brake rotors. All total, the guy charged me $25 for labor; all things considered, money well spent.

Finally after prepping the bushings and inserting the pins, I was ready to install the trailing arms. After multiple trial installations, I was able to mount the trailing arms into the suspension ears and control arm bearings. The control arm bearing is also where the shims are added if you need to add camber. I also installed the strut assemblies too which had been previously assembled with new 180 lb springs from Pelican Parts $136/pair and new Boge heavy duty shock absorbers $98/shock previously purchased some time ago.

And here they are, left trailing arm and strut assembly:



And right trailing arm and strut assembly:



I'm going to tackle the front suspension next weekend.

Instrument Panel, Side Markers, and Turn Signals

May 23, 2010 - Lots of small things installed. Mainly but not so small is the instrument panel assembly. Whew!! What a PITA that was. All three gauges, Tachometer, Speedometer, and Fuel Gauge had to taken apart, glass cleaned, and retaining rings rust remediated (rust killer, rust encapsulator, and painted flat black). Also treated the instrument panel as well.

Headlights almost finished along with turn signals:



Installed the side markers and turn signals with new seals from Mark Whitesell in Hillsboro, OR. His eBay merchant name is 914rubber.



Left turn signal:



Right side marker:



Right turn signal:



Gauges looking pretty good, added dashboard to see how it would look. My neighbor Freddie helped to hook up all of the gauge connectors and indicator bulbs. Another PITA. I replaced the illuminating incandescent bulbs with blue LEDs from Mike Whitesell aka eBay merchant autoleds4you. He sells 8 for $20. There are 5 illumninating bulbs and 8 indicator bulbs for a total of 13.



Another view of the instrument panel and dashboard:



Check out the new rear trunk seals. The previous owner sold me these along with his other eBay auction items he had procured along the way:



I was able to win a windshield via eBay for $120 but the shipping was $200. It was packaged and shipped by UPS in Auburn, WA. They did a really nice job of packaging to ensure it was received intact, which it was. A lot better than the AutoAtlanta price of $500 plus $200 shipping. I'll try to have it installed when I have all of the seals and installation kit. More on that later.

Painting Finished - Headlights Installed

May 2, 2010 - I have finally finished painting the vehicle. Woohoo! I had to buy more paint from Sherwin Williams Automotive and was able to put another coat on the interior and two coats on the hellhole/transaxle area. She really looks great now, inside and underneath.

Here's the hellhole firewall; looking very clean:



Here's the ceiling of the transaxle area:



Here's a left view of the hellhole area:



And a right view of the hellhole area:



I went thru two bad headlight motors and two relays, luckily I had six, and it took 4 hours in total to get the right headlight and motor installed correctly but it definitely works. I had to buy another headlight assembly off eBay to get the actuator lever and couple other related parts to install the left headlight assembly but finally got it intalled. The assemblies are black from coating with Eastwood's Rust Encapsulator. They were terribly rusty but with a lot of painstaking labor, I was able to restore them. You can also see the almost new chrome headlight rings that I got off eBay for $10 with shipping.



I also ordered new taillight housing seals from eBay vendor 914rubber and installed both assemblies.

Painting the Interior

April 11, 2010 - I was able to wrap up priming with Rust Encapsulator on Friday, thus enabling me to start painting the interior on Saturday. Had to take my son Woody car viewing first part of the day to see what kind of vehicle he'd be happy with. He's starting USF in the fall and will need a dependable car to commute to school and back every day. So I started rather late in the day, about 4:00PM, but with plenty of time to get a first coat on.

As fate would have it, I was about 90% complete when the spray gun quit working and thus had to quit for the day and give it a good cleaning. I restarted on Sunday and was able to finalize the first coat. At this point, I ran out of the blue metallic paint and I'm debating whether or not buy more to give it a second coat. If I do decide to buy more, I'll get enough to paint the hell hole/transaxle area too. The price of the paint will be the decision point for sure.

I'm really pleased as to how well the blue paint sprayed on. Here are some pictures of the finalized first coat:

Passenger view of seat and foot well:



Passenger view of foot well:



Passenger view of seat back area:



View of driver and passenger seat back area:



Driver view of seat back area:



Driver view of seat well:



Driver view of foot well:



Driver view of console center tunnel:



Driver view of seat back firewall area:



Driver view of rocker panel:



Passenger view of rocker panel:



Passenger side gas tank area; you can clearly see the area above the driver foot well has been bashed in to accommodate the battery box that will hold three LA batteries:



Driver side gas tank area:

Priming with Rust Encapsulator

April 9, 2010 - Finally the weather has warmed up and the live oaks have just about quit spewing their pollen granules. I was able to tape up the car last weekend and attempted to start priming the car with Eastwood's Rust Encapsulator. The Rust Encapsulator is a great product and puts down a great coat but I don't think the creators intended for it to be used in a spray gun even though they do sell spray cans.

My first attempt at using thinned down Rust encapsulator ended in frustration as it just kept stopping up the gun. I used lacquer thinner like they suggested but it would just not spray. I eventually had to buy paint strainers and strain it extremely well before the gun would spray it. But once well-strained, it sprayed on like a champ. I have no doubt that the paint will lay down and adhere nicely to the coat of Rust Encapsulator. I intended to spray on two coats but I went thru 1 & 1/2 quart cans mixing up and straining enough for one good coat.

I should add that last Sunday after getting frustrated with the spray gun stopping up, I went to manual mode and used a 1" brush to paint the outer firewall in the hell hole. So when I figured out the straining trick, the hell hole got a second sprayed-on coat.

I'll paint the interior with the same blue paint as the exterior. I only have about 1/5 of the original gallon left. If I run out before I'm finished, I'll have to buy more. I'm pretty sure this paint is not cheap. For the hell hole/transaxle area, I'm going to use Eastwood's Rubberized Undercoating in spray cans. I used the undercoating after repairing the rust in the the passenger side front wheel well and it turned out extremely well.

Here's the car after taping it up:



Hell hole view from rear looking up forward after being primed:



Hell hole view, firewall closeup:



Hell hole view, left side:



Hell hole view, right side:



Transaxle compartment view, looking up from ground:



Interior view, driver side; passenger side not primed yet:



Interior view, driver side footwell:



Interior view, seat back firewall; passenger side not primed yet:



Interior view, driver seat well:



Interior view, driver side seatback; passenger side not primed yet:



Interior view, driver side seat well:



Interior view, driver side foot well:



Interior view, driver side footwell closeup:



Interior view, passenger side primed:



Interior view, passenger side seat back view:



Interior view, passenger side foot well:



Interior view, fully primed:



Interior view, both foot wells primed: